1. **Vacuuming:**

- Thorough vacuuming of all carpeted areas, including under seats and in crevices.

2. **Detailed Wipe Down:**

- Cleaning and wiping down of dashboard, center console, door panels, and all other interior surfaces to remove dust, dirt, and grime.

3. **Upholstery and Leather Cleaning:**

- Cleaning and conditioning of upholstery and leather surfaces to remove stains, dirt, and oils, and to restore moisture and luster.

4. **Shampoo Seats and Carpet:**

- Deep cleaning of seats and carpet using a suitable shampooing method to lift stains, eliminate odors, and rejuvenate fabric.

5. **Deodorizing:**

- Application of a deodorizing agent to neutralize and eliminate odors from upholstery, carpet, and other interior surfaces.

6. **Interior Glass Cleaning:**

- Cleaning of interior glass surfaces (windows, mirrors) to ensure clarity and visibility.

7. **Air Vent Cleaning:**

- Cleaning of air vents and other hard-to-reach areas to remove dust and debris.

8. **Final Inspection:**

- Thorough inspection of the entire interior to ensure cleanliness and quality of work.

1. **Pre-Rinse:**

- Initial rinse of the vehicle to remove loose dirt and debris.

2. **Pre-Foam Application:**

- Application of a foam cleaner or degreaser to the entire vehicle, allowing it to dwell and loosen stubborn dirt and grime.

3. **Full Foam Wash:**

- Using wash mitts, the foam is agitated to lift dirt and grime, ensuring a thorough cleaning without scratching the paint.

4. **Bug and Tar Removal:**

- Targeted removal of bugs, tar spots, and other contaminants using appropriate cleaners or solvents.

5. **Clay Bar Treatment:**

- Clay bar is used to gently remove embedded contaminants such as industrial fallout, brake dust, and tree sap from the paint surface.

6. **Wheel Cleaning:**

- Cleaning of wheels using a wheel cleaner to remove brake dust, dirt, and grime. A variety of brushes may be used to access intricate areas.

7. **Wheel Well Cleaning:**

- Thorough cleaning of wheel wells to remove mud, dirt, and debris that can accumulate and cause corrosion.

8. **Window Cleaning:**

- Cleaning of exterior windows and mirrors to ensure clarity and visibility.

9. **Wax Application:**

- Application of a high-quality wax to protect the paint and enhance its shine.

10. **Hand Drying:**

- Thorough drying of the vehicle using soft, microfiber towels to prevent water spots and ensure a streak-free finish.

11. **Final Inspection:**

- Detailed inspection of the exterior to ensure all contaminants are removed, and the paint surface is smooth and glossy.

1. **Wash and Decontamination:**

- Thoroughly wash the vehicle to remove surface dirt and debris.

- Decontaminate the paint using a clay bar or chemical decontamination to remove embedded contaminants like industrial fallout and tar.

2. **Paint Inspection:**

- Inspect the paint under proper lighting to identify imperfections such as swirl marks, scratches, oxidation, and water spots.

3. **Paint Correction (if necessary):**

- Perform paint correction using machine polishers and appropriate polishing compounds to remove imperfections and restore the paint's clarity and gloss.

- Multiple polishing stages may be required, starting from a heavier cutting compound to finer polishes for refining.

4. **Panel Wiping:**

- Clean the paint thoroughly with an IPA (Isopropyl Alcohol) solution or panel wipe to remove any remaining polish residues and oils, ensuring a clean surface for ceramic coating.

5. **Ceramic Coating Application:**

- Apply ceramic coating to the clean and prepared paint surface in a controlled environment.

- Use applicator pads or cloths to evenly distribute the coating over small sections at a time.

- Allow the coating to bond with the paint surface, typically with a curing time specified by the manufacturer.

6. **Curing Stage:**

- After application, allow the ceramic coating to cure for the recommended period, often 24 to 48 hours.

- During this time, avoid exposure to water or other contaminants that could interfere with the bonding process.

7. **Final Inspection and Touch-Ups:**

- Inspect the coated surface under different lighting conditions to ensure uniform coverage and a high-gloss finish.

- Touch up any areas that may require additional coating or correction.

8. **Quality Check:**

- Perform a final quality check to ensure the ceramic coating has bonded properly and achieved the desired level of protection and enhancement.

9. **Maintenance Advice:**

- Provide the vehicle owner with maintenance instructions and advice on how to care for the ceramic-coated surface to maximize longevity and performance.